| RC Mounting - universal |
  |
| Ref. |
Details |
Price |
|
311Q |
This moulding is used to support the servo and winch in our production Marblehead and Ten Raters from mid 2010 onwards. It is optimised to support an RMG280 which is mounted first to a plate (item 67dia). The servo recess is designed for 40 x 20 or 42 x 21 mm servos. The third hole is the correct diameter for our rc pot (item 54). The recesses at the fore and aft ends of the moulding are to allow bonding onto the fin box and main sheet post trunking respectively. The moulding is supplied without the holes/recesses cut and without the fastening bolts. Normally made in carbon - can be supplied in glass. |
44.50 |
|
|
|
